Vision Speedo D/S 140 Mph/220 Kph
The VDO Cockpit Vision programmable speedometer with resettable LCD trip odometer. Features unique, easy, auto-calibration function through the LCD display.
Supports 12 Volt and 24 Volt system with bulb changes.
80 mm diameter.
The drive for this display system is a stepper motor, comprising a permanent magnet rotor within a crossed winding arrangement. A zero backlash gearbox at the output ensures a high drove torque and fine resolution. The gearbox has a reduction ratio of 43.2 : 1 and an internal mechanical stop. The stepper motor drive was developed specially by VDO for this product.
The drive produces a bipolar sinusoidal variable voltage using digital pulse width modulation. There is a 90° phase difference ( sine-cosine ) between the voltages on the two motor coils. This rotates the electromagnetic field through equidistant angular steps with a constant length resultant vector (sin2Ø + cos2 Ø = 1).
The motor torque is therefore constant at each step with zero cogging. At the pointer one motor step equals 0.065°.
The stepper motor parameters and the design of VDO control-driver electronics are carefully matched to ensure reliable operation of the system under all conditions. Optimised control algorithms ensure a visually smooth pointer motion.
Supports 12 Volt and 24 Volt system with bulb changes.
80 mm diameter.
The drive for this display system is a stepper motor, comprising a permanent magnet rotor within a crossed winding arrangement. A zero backlash gearbox at the output ensures a high drove torque and fine resolution. The gearbox has a reduction ratio of 43.2 : 1 and an internal mechanical stop. The stepper motor drive was developed specially by VDO for this product.
The drive produces a bipolar sinusoidal variable voltage using digital pulse width modulation. There is a 90° phase difference ( sine-cosine ) between the voltages on the two motor coils. This rotates the electromagnetic field through equidistant angular steps with a constant length resultant vector (sin2Ø + cos2 Ø = 1).
The motor torque is therefore constant at each step with zero cogging. At the pointer one motor step equals 0.065°.
The stepper motor parameters and the design of VDO control-driver electronics are carefully matched to ensure reliable operation of the system under all conditions. Optimised control algorithms ensure a visually smooth pointer motion.
