Sensors & Switches

VDO sensors and switches are designed to support the full range of instruments available from Continental Automotive.

PLEASE NOTE;

Due to the variety of sensors we stock, VDO advise speaking to our Technical Department to confirm the correct sensor for your application. Telephone 0121 326 1271.
Below is a section of sensors but it is your responsibility to make sure they are suitable for your application, most importantly the thread size.

Temperature Sender 120 Degree Centigrade

This sensor is used with a 120 Degree coolant temperature gauge. Thread size 1/2 inch - 14 NPTF (Earth Return) Blade Connector.
323-803-001-032D	£23.25

Temperature Sender 120 Degrees Centigrade

This sensor is typically used with a 120 Degree coolant temperature gauge. Thread size 5/8 - 18 NF (Earth Return) Blade Connector.
323-803-001-059D	£30.77

120 Degree Temperature Sender/1/8-27NPTF

This sensor is typically used with a 120 Degree coolant temperature gauge. Thread size 1/8 - 27 NPTF (Earth Return) Button Connector.
323-801-005-001D	£8.23

5 Bar Pressure Sender

VDO 5 bar oil pressure sender typically used with a 5 bar pressure gauge. Thread size 1/4 - 18 NPTF M4 knurled nut.
360-081-029-008C	£39.52

Speed Sender

Speed Sender M18 - 1.5 34 mm Probe length 2 x Blade Connector. Typically used to provide a speed signal to a speedometer.
340-804-007-003C	£62.78

Fuel Float Arm Sender

Adjustable 54 mm diameter fuel sender float arm. Typically used with a float arm fuel gauge due to the resistance characteristics.
226-801-015-001C	£41.75

Temperature Sender 120 Degrees Centigrade

This sensor is typically used with a 120 Degree coolant temperature gauge. Thread size 1/2 - 14 NPTF (Earth Return) Blade Connector.
323-803-001-030D	£30.61

Pressure Sender

Pressure sender 10 Bar (insulated) WC5.0 M14 x 1.5
360-081-039-008C	£15.99
	OUT OF STOCK

Pressure Sender 10 Bar

VDO 10 bar oil pressure sender typically used with a 10 bar pressure gauge. Thread size - M12 x 1.5 insulated return push on connector.
360-081-063-001C	£38.86
	OUT OF STOCK

Pressure Sender 10 Bar

VDO 10 bar oil pressure sender typically used with a 10 bar pressure gauge. Thread size - 1/8 - 27 NPTF (Earth Return) Blade Connector.
360-081-029-042C	£41.50

Pressure Sender 10 Bar

VDO 10 bar oil pressure sender typically used with a 10 bar pressure gauge. Thread size - 1/8 - 27 NPTF (Earth Return) Blade Connector.
360-081-030-138C	£23.81

Inductive Sender 34m

Inductive Sender M18 - 1.5 34 mm probe length 2 x Blade Connector. Typically used to provide a speed signal to a speedometer.
340-804-006-007C	£53.41